dots/configs/home/.config/polybar/old/bars.ini
2023-10-27 19:56:44 +02:00

552 lines
14 KiB
INI
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

;; ┌────────────────────────────────────────────────────┐
;; │░█▀█░█▀█░█░░░█░█░█▀▄░█▀█░█▀▄░░░░░░░░░█▀▄░█▀█░█▀▄░█▀▀│
;; │░█▀▀░█░█░█░░░░█░░█▀▄░█▀█░█▀▄░░░░▀░░░░█▀▄░█▀█░█▀▄░▀▀█│
;; │░▀░░░▀▀▀░▀▀▀░░▀░░▀▀░░▀░▀░▀░▀░░░░▀░░░░▀▀░░▀░▀░▀░▀░▀▀▀│
;; │░Created░By░Aditya░Shakya░@adi1090x░░░░░░░░░░░░░░░░░│
;; └────────────────────────────────────────────────────┘
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
[bar]
fill =
empty =
indicator =
; Nerd font :   ,  ,  樂 籠 錄 , 雷 絛
[module/volume]
type = internal/alsa
; Soundcard to be used
; Usually in the format hw:# where # is the card number
; You can find the different card numbers in `/proc/asound/cards`
master-soundcard = default
speaker-soundcard = default
headphone-soundcard = default
; Name of the master, speaker and headphone mixers
; Use the following command to list available mixer controls:
; $ amixer scontrols | sed -nr "s/.*'([[:alnum:]]+)'.*/\1/p"
; If master, speaker or headphone-soundcard isn't the default,
; use `amixer -c # scontrols` instead where # is the number
; of the master, speaker or headphone soundcard respectively
;
; Default: Master
master-mixer = Master
; Optionally define speaker and headphone mixers
; Default: none
;;speaker-mixer = Speaker
; Default: none
;;headphone-mixer = Headphone
; NOTE: This is required if headphone_mixer is defined
; Use the following command to list available device controls
; $ amixer controls | sed -r "/CARD/\!d; s/.*=([0-9]+).*name='([^']+)'.*/printf '%3.0f: %s\n' '\1' '\2'/e" | sort
; You may also need to use `amixer -c # controls` as above for the mixer names
; Default: none
;;headphone-id = 9
; Use volume mapping (similar to amixer -M and alsamixer), where the increase in volume is linear to the ear
; Default: false
;;mapped = true
; Interval for volume increase/decrease (in percent points)
; Default: 5
interval = 5
; Available tags:
; <label-volume> (default)
; <ramp-volume>
; <bar-volume>
format-volume = <ramp-volume> <bar-volume>
; Available tags:
; <label-muted> (default)
; <ramp-volume>
; <bar-volume>
format-muted = <label-muted>
format-muted-prefix =
format-muted-prefix-foreground = ${color.red}
; Available tokens:
; %percentage% (default)
label-volume = %percentage%%
; Available tokens:
; %percentage% (default
label-muted = " Muted"
label-muted-foreground = ${color.sep}
; Only applies if <ramp-volume> is used
ramp-volume-0 =
ramp-volume-1 =
ramp-volume-2 =
ramp-volume-foreground = ${color.blue}
; Only applies if <bar-volume> is used
bar-volume-format = "%fill%%indicator%%empty%"
bar-volume-width = 11
bar-volume-gradient = false
bar-volume-indicator = ${bar.indicator}
bar-volume-indicator-foreground = ${color.foreground}
bar-volume-indicator-font = 2
bar-volume-fill = ${bar.fill}
bar-volume-fill-font = 2
bar-volume-foreground-0 = ${color.green}
bar-volume-foreground-1 = ${color.green}
bar-volume-foreground-2 = ${color.yellow}
bar-volume-foreground-3 = ${color.yellow}
bar-volume-foreground-4 = ${color.red}
bar-volume-empty = ${bar.empty}
bar-volume-empty-font = 2
bar-volume-empty-foreground = ${color.sep}
; If defined, it will replace <ramp-volume> when
; headphones are plugged in to `headphone_control_numid`
; If undefined, <ramp-volume> will be used for both
; Only applies if <ramp-volume> is used
ramp-headphones-0 =
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
[module/brightness]
;type = internal/xbacklight
type = internal/backlight
; Use the following command to list available cards:
; $ ls -1 /sys/class/backlight/
;card = intel_backlight
card = amdgpu_bl0
; Available tags:
; <label> (default)
; <ramp>
; <bar>
format = <ramp> <bar>
; Available tokens:
; %percentage% (default)
label = %percentage%%
; Only applies if <ramp> is used
ramp-0 =
ramp-1 =
ramp-2 =
ramp-3 =
ramp-4 =
ramp-foreground = ${color.lime}
; Only applies if <bar> is used
bar-format = "%fill%%indicator%%empty%"
bar-width = 11
bar-gradient = false
bar-indicator = ${bar.indicator}
bar-indicator-foreground = ${color.foreground}
bar-indicator-font = 2
bar-fill = ${bar.fill}
bar-fill-font = 2
bar-foreground-0 = ${color.green}
bar-foreground-1 = ${color.green}
bar-foreground-2 = ${color.yellow}
bar-foreground-3 = ${color.yellow}
bar-foreground-4 = ${color.red}
bar-empty = ${bar.empty}
bar-empty-font = 2
bar-empty-foreground = ${color.sep}
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
[module/battery_bar]
type = internal/battery
; This is useful in case the battery never reports 100% charge
full-at = 99
; Use the following command to list batteries and adapters:
; $ ls -1 /sys/class/power_supply/
battery = BAT1
adapter = ACAD
; If an inotify event haven't been reported in this many
; seconds, manually poll for new values.
;
; Needed as a fallback for systems that don't report events
; on sysfs/procfs.
;
; Disable polling by setting the interval to 0.
;
; Default: 5
poll-interval = 2
; see "man date" for details on how to format the time string
; NOTE: if you want to use syntax tags here you need to use %%{...}
; Default: %H:%M:%S
time-format = %H:%M
; Available tags:
; <label-charging> (default)
; <bar-capacity>
; <ramp-capacity>
; <animation-charging>
format-charging = <bar-capacity>
format-charging-prefix = ""
format-charging-prefix-foreground = ${color.green}
; Available tags:
; <label-discharging> (default)
; <bar-capacity>
; <ramp-capacity>
; <animation-discharging>
format-discharging = <bar-capacity>
format-discharging-prefix = ""
format-discharging-prefix-foreground = ${color.pink}
; Available tags:
; <label-full> (default)
; <bar-capacity>
; <ramp-capacity>
format-full = <label-full>
format-full-prefix = ""
format-full-prefix-foreground = ${color.red}
; Available tokens:
; %percentage% (default)
; %time%
; %consumption% (shows current charge rate in watts)
label-charging = %percentage%%
; Available tokens:
; %percentage% (default)
; %time%
; %consumption% (shows current discharge rate in watts)
label-discharging = %percentage%%
; Available tokens:
; %percentage% (default)
label-full = Full
; Only applies if <bar-capacity> is used
bar-capacity-format = " %fill%%indicator%%empty%"
bar-capacity-width = 11
bar-capacity-gradient = false
bar-capacity-indicator = ${bar.indicator}
bar-capacity-indicator-font = 2
bar-capacity-indicator-foreground = ${color.foreground}
bar-capacity-fill = ${bar.fill}
bar-capacity-fill-font = 2
bar-capacity-foreground-0 = ${color.green}
bar-capacity-foreground-1 = ${color.green}
bar-capacity-foreground-2 = ${color.yellow}
bar-capacity-foreground-3 = ${color.yellow}
bar-capacity-foreground-4 = ${color.red}
bar-capacity-empty = ${bar.empty}
bar-capacity-empty-font = 2
bar-capacity-empty-foreground = ${color.sep}
bar-fill-font = 2
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
[module/cpu_bar]
type = internal/cpu
; Seconds to sleep between updates
; Default: 1
interval = 0.5
; Available tags:
; <label> (default)
; <bar-load>
; <ramp-load>
; <ramp-coreload>
;;format = <label> <ramp-coreload>
format = <bar-load><label>
format-prefix =
format-prefix-foreground = ${color.teal}
; Available tokens:
; %percentage% (default) - total cpu load averaged over all cores
; %percentage-sum% - Cumulative load on all cores
; %percentage-cores% - load percentage for each core
; %percentage-core[1-9]% - load percentage for specific core
label = " %percentage%%"
; Only applies if <bar-load> is used
bar-load-format = " %fill%%indicator%%empty%"
bar-load-width = 11
bar-load-gradient = false
bar-load-indicator = ${bar.indicator}
bar-load-indicator-font = 2
bar-load-indicator-foreground = ${color.foreground}
bar-load-fill = ${bar.fill}
bar-load-fill-font = 2
bar-load-foreground-0 = ${color.green}
bar-load-foreground-1 = ${color.green}
bar-load-foreground-2 = ${color.yellow}
bar-load-foreground-3 = ${color.yellow}
bar-load-foreground-4 = ${color.red}
bar-load-empty = ${bar.empty}
bar-load-empty-font = 2
bar-load-empty-foreground = ${color.sep}
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
[module/filesystem_bar]
type = internal/fs
; Mountpoints to display
mount-0 = /
;;mount-1 = /home
;;mount-2 = /var
; Seconds to sleep between updates
; Default: 30
interval = 30
; Display fixed precision values
; Default: false
fixed-values = false
; Spacing between entries
; Default: 2
;;spacing = 4
; Available tags:
; <label-mounted> (default)
; <bar-free>
; <bar-used>
; <ramp-capacity>
format-mounted = <bar-used><label-mounted>
format-mounted-prefix =
format-mounted-prefix-foreground = ${color.purple}
; Available tags:
; <label-unmounted> (default)
format-unmounted = <label-unmounted>
format-unmounted-prefix =
format-unmounted-prefix-foreground = ${color.red}
; Available tokens:
; %mountpoint%
; %type%
; %fsname%
; %percentage_free%
; %percentage_used%
; %total%
; %free%
; %used%
; Default: %mountpoint% %percentage_free%%
label-mounted = " %used%/%total%"
; Available tokens:
; %mountpoint%
; Default: %mountpoint% is not mounted
label-unmounted = " %mountpoint%: not mounted"
; Only applies if <bar-used> is used
bar-used-format = " %fill%%indicator%%empty%"
bar-used-width = 11
bar-used-gradient = false
bar-used-indicator = ${bar.indicator}
bar-used-indicator-font = 2
bar-used-indicator-foreground = ${color.foreground}
bar-used-fill = ${bar.fill}
bar-used-fill-font = 2
bar-used-foreground-0 = ${color.green}
bar-used-foreground-1 = ${color.green}
bar-used-foreground-2 = ${color.yellow}
bar-used-foreground-3 = ${color.yellow}
bar-used-foreground-4 = ${color.red}
bar-used-empty = ${bar.empty}
bar-used-empty-font = 2
bar-used-empty-foreground = ${color.sep}
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
[module/memory_bar]
type = internal/memory
; Seconds to sleep between updates
; Default: 1
interval = 2
; Available tags:
; <label> (default)
; <bar-used>
; <bar-free>
; <ramp-used>
; <ramp-free>
; <bar-swap-used>
; <bar-swap-free>
; <ramp-swap-used>
; <ramp-swap-free>
format = <bar-used><label>
format-prefix =
format-prefix-foreground = ${color.indigo}
; Available tokens:
; %percentage_used% (default)
; %percentage_free%
; %gb_used%
; %gb_free%
; %gb_total%
; %mb_used%
; %mb_free%
; %mb_total%
; %percentage_swap_used%
; %percentage_swap_free%
; %mb_swap_total%
; %mb_swap_free%
; %mb_swap_used%
; %gb_swap_total%
; %gb_swap_free%
; %gb_swap_used%
label = " %mb_used%"
; Only applies if <bar-used> is used
bar-used-format = " %fill%%indicator%%empty%"
bar-used-width = 11
bar-used-gradient = false
bar-used-indicator = ${bar.indicator}
bar-used-indicator-font = 2
bar-used-indicator-foreground = ${color.foreground}
bar-used-fill = ${bar.fill}
bar-used-fill-font = 2
bar-used-foreground-0 = ${color.green}
bar-used-foreground-1 = ${color.green}
bar-used-foreground-2 = ${color.yellow}
bar-used-foreground-3 = ${color.yellow}
bar-used-foreground-4 = ${color.red}
bar-used-empty = ${bar.empty}
bar-used-empty-font = 2
bar-used-empty-foreground = ${color.sep}
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
[module/mpd_bar]
type = internal/mpd
; Host where mpd is running (either ip or domain name)
; Can also be the full path to a unix socket where mpd is running.
;;host = 127.0.0.1
;;port = 6600
;;password = mysecretpassword
; Seconds to sleep between progressbar/song timer sync
; Default: 1
interval = 1
; Available tags:
; <label-song> (default)
; <label-time>
; <bar-progress>
; <toggle> - gets replaced with <icon-(pause|play)>
; <toggle-stop> - gets replaced with <icon-(stop|play)>
; <icon-random>
; <icon-repeat>
; <icon-repeatone> (deprecated)
; <icon-single> - Toggle playing only a single song. Replaces <icon-repeatone>
; <icon-consume>
; <icon-prev>
; <icon-stop>
; <icon-play>
; <icon-pause>
; <icon-next>
; <icon-seekb>
; <icon-seekf>
format-online = <label-song><bar-progress><label-time>
format-online-prefix =
format-online-prefix-foreground = ${color.green}
;format-playing = ${self.format-online}
;format-paused = ${self.format-online}
;format-stopped = ${self.format-online}
; Available tags:
; <label-offline>
format-offline = <label-offline>
format-offline-prefix =
format-offline-prefix-foreground = ${color.red}
; Available tokens:
; %artist%
; %album-artist%
; %album%
; %date%
; %title%
; Default: %artist% - %title%
label-song = " %artist% - %title%"
label-song-maxlen = 25
label-song-ellipsis = true
; Available tokens:
; %elapsed%
; %total%
; Default: %elapsed% / %total%
label-time = " %elapsed% / %total%"
; Available tokens:
; None
label-offline = " Offline"
; Only applies if <icon-X> is used
icon-play =
icon-pause =
icon-stop =
icon-next =
icon-prev =
icon-seekf =
icon-seekb =
icon-random =
icon-repeat =
icon-repeatone =
icon-single =
icon-consume =
; Used to display the state of random/repeat/repeatone/single
; Only applies if <icon-[random|repeat|repeatone|single]> is used
toggle-on-foreground = ${color.primary}
toggle-off-foreground = ${color.secondary}
; Only applies if <bar-progress> is used
bar-progress-format = " %fill%%indicator%%empty%"
bar-progress-width = 11
bar-progress-gradient = false
bar-progress-indicator = ${bar.indicator}
bar-progress-indicator-font = 2
bar-progress-indicator-foreground = ${color.foreground}
bar-progress-fill = ${bar.fill}
bar-progress-fill-font = 2
bar-progress-foreground-0 = ${color.green}
bar-progress-foreground-1 = ${color.green}
bar-progress-foreground-2 = ${color.yellow}
bar-progress-foreground-3 = ${color.yellow}
bar-progress-foreground-4 = ${color.red}
bar-progress-empty = ${bar.empty}
bar-progress-empty-font = 2
bar-progress-empty-foreground = ${color.sep}
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_